Programming these newer Winbond BIOS chips with this programmer is easy, only a few easy steps need to be taken.
Here is an example to show you how to program a W39V080FAPZ:
Note: Make sure the programming voltage is atNormal Vpp (12.5v) . Higher Vpp could damage these fragile bios chips !
1, Select chip type and software setting:
Here is an example to show you how to program a W39V080FAPZ:
Note: Make sure the programming voltage is atNormal Vpp (12.5v) . Higher Vpp could damage these fragile bios chips !
1, Select chip type and software setting:
Now you will see the following settings:
The desired socket to insert your winbond chip is highlighted, and the Vpp jumper right next to the target FWH socket
needs to be removed. The required configuration of 12-position digital switch is shown as 1,4,7,9,11 OFF; 2,3,5,6,8,10,12
ON. Please use the ON/OFF toggle switch and MOVE switch to set the 12-position digital switch. Now you can insert
your W39V080FAPZ in the socket. The following picture shows you the correct setup before you will read and/or
program your chip. Please consult with the bios programming section for more info on how to read, program and copy these
winbond chips.
needs to be removed. The required configuration of 12-position digital switch is shown as 1,4,7,9,11 OFF; 2,3,5,6,8,10,12
ON. Please use the ON/OFF toggle switch and MOVE switch to set the 12-position digital switch. Now you can insert
your W39V080FAPZ in the socket. The following picture shows you the correct setup before you will read and/or
program your chip. Please consult with the bios programming section for more info on how to read, program and copy these
winbond chips.
